Plugins connect the Monotype Connect+ App to your creative applications. They help resolve missing-font issues by scanning documents, identifying required fonts, and activating available fonts automatically so you can continue working without interruptions.
Before you begin, make sure:
The Monotype Connect+ App is installed.
You're signed in to your Monotype account.
At least one supported creative application is installed on your computer.
Your application version meets the requirements listed in System requirements.
This article helps you understand:
How plugins work
When you open a document in a supported creative application, the Monotype Connect+ app plugin checks the file for missing fonts.
If fonts used in the document are available through your company's Monotype subscription, the plugin can activate them automatically, helping collaborators open and work on files without manually locating and installing fonts.
The plugin appears either:
As an embedded panel inside the creative application, or
As a floating panel that opens alongside the creative application.
Supported apps and panel types
Each plugin opens as an embedded panel inside the creative app or as a floating panel next to it.
For supported versions, see System requirements.
Creative app | Panel type |
Adobe InDesign | Embedded |
Adobe Illustrator | Embedded |
Adobe InCopy | Embedded |
Adobe Photoshop | Floating |
Apple Pages | Floating |
Apple Keynote | Floating |
Apple Numbers | Floating |
Note: Additional applications may be supported in future releases. Refer to System requirements for the most current compatibility information.
How to install a plugin
The Monotype Connect+ App can automatically install plugins for every supported creative application detected on your computer.
Tip: You can manage plugins individually for each supported creative application. But it is recommended to enable Install all plugins.
To install plugins:
Open the Monotype Connect+ App.
Click Preferences from Profile menu.
Select Plugins.
Under Apps available on system, turn on Install all plugins or plugin for the required application(s).
When prompted, allow the installation to complete.
Once the plugins are installed, you will get the notification that plugins are installed on your device.
Restart the supported creative applications that are currently open.
After installation, the plugin is available in each supported application detected on your system.
Remove a plugin for a specific app
Removing a plugin is typically only necessary for troubleshooting, application-specific preferences, or IT-managed environments.
You can also manage (install or remove) plugins individually for supported applications.
To remove a plugin:
Open Preferences > Plugins.
Locate the application for which you need to remove the plugin.
Turn off the toggle next to the application name.
Restart the application to complete the removal.
The Monotype Connect+ App may display a reminder to restart your creative application after installing or uninstalling a plugin.
Open the Monotype Connect+ panel
After installing a plugin, open the Monotype panel from within your creative application.
Embedded panels
For applications with embedded panels, open the Monotype panel from the application's Window, Extensions, or Plugins menu, depending on the application.
Examples include:
Adobe InDesign
Adobe Illustrator
Adobe InCopy
Floating panels
For applications that use floating panels, the Monotype panel opens automatically alongside the creative application when you open a supported document.
Examples include:
Automatically open the Photoshop plugin
If you're using Adobe Photoshop, you can configure the plugin to open automatically whenever Photoshop launches.
The Monotype panel will open automatically the next time Photoshop starts.
What to expect
After the plugin is installed:
The Monotype Connect+ panel becomes available in your supported creative applications.
Documents are scanned for missing fonts when opened.
Available fonts can be activated automatically.
Teams can collaborate more efficiently without manually locating and installing fonts.
If fonts cannot be activated automatically, verify that:
The font is included in your company's Monotype subscription.
You're signed in to the Monotype Connect+ App.
The plugin is installed and enabled for the application you're using.
The application version is supported according to System requirements.
Configure temporary font deactivation
Choose when temporary fonts activated by plugins are automatically deactivated.
Open Preferences > Plugins.
Under Temporary font deactivation, open the Deactivate temporary fonts when dropdown.
Select one of the following options:
Document close: Deactivate fonts when the document closes.
Creative app close: Deactivate fonts when the creative application closes.
The setting is saved automatically.
Tip: Select Creative app close if you frequently work with multiple documents that use the same fonts during a session.
Frequently asked questions
Why do I need the Monotype Connect+ plugin?
The plugin connects your creative application to the Monotype Connect+ App. It helps identify missing fonts in documents and activates available fonts automatically, reducing interruptions and helping teams work with shared files more efficiently.
Do I need to install a plugin for every creative app?
No. You can enable Install all plugins to install plugins for all supported applications detected on your system, or you can install plugins individually for specific applications.
Do I need administrator permissions to install plugins?
In some environments, administrator permissions may be required to install or update plugins. If installation fails or the toggle cannot be enabled, contact your IT administrator.
Why am I being asked to restart my creative app?
A restart ensures the application recognizes the newly installed or removed plugin. Some applications cannot load plugin changes while running.
What happens when I open a document with missing fonts?
The plugin scans the document and looks for fonts used in the file. If those fonts are available through your company's Monotype subscription, they are activated automatically. If a font cannot be activated, the plugin displays guidance about the missing font.
Can I use the plugin when the Monotype Connect+ App is closed?
No. The Monotype Connect+ App must be running and you must be signed in for plugin features such as font detection and activation to work.
Why can't I see the Monotype Connect+ panel in my creative application?
Verify that:
The plugin is installed for the application.
The application version is supported.
The Monotype Connect+ App is running.
You have restarted the application after installation.
You are signed in to Monotype Connect+.
Can I disable automatic plugin installation?
Yes. Turn off Install all plugins and manage plugins individually using the application-specific toggles.
Does the plugin install fonts permanently?
Not necessarily. Depending on your organization's configuration and activation settings, fonts may be activated temporarily while documents are open and automatically deactivated later.
Troubleshooting and error resolution
Issue | What you see | Possible cause | Resolution |
No supported creative apps detected |
| No supported creative applications are installed, the installed version is unsupported, or Connect+ has not detected the application. |
|
Application not detected | A supported creative application does not appear under Apps available on system. | Unsupported version, incomplete installation, or application was installed after Connect+ was launched. |
|
Plugin installation failed | The plugin toggle cannot be enabled or an installation error appears. | Insufficient permissions, security software restrictions, or the application is running during installation. |
|
Restart required after installation | A message prompts you to restart the creative application. | The application has not loaded the newly installed plugin. | Close and reopen the creative application. |
Plugin not visible in the creative app | The Monotype panel does not appear after installation. | Plugin is disabled, application was not restarted, or installation failed. | Verify the plugin is enabled in Preferences > Plugins, then restart the application. |
Plugin installs but panel does not open | Plugin appears installed but the Monotype panel is unavailable. | Panel is hidden, application restart is required, or plugin initialization failed. | Open the panel from the application's Window, Extensions, or Plugins menu, then restart the application if needed. |
Unable to communicate with Monotype Connect+ App | The plugin displays a connection or communication error. | Connect+ App is not running, user is signed out, or local security software is interfering. | Launch Connect+, sign in, restart both applications, and allow communication through any security tools. |
Missing fonts are not activated | Fonts remain missing when opening a document. | Font is unavailable in the organization's library, user is not signed in, or plugin communication failed. | Verify sign-in status, network connectivity, and font availability, then reopen the document. |
Some fonts activate but others do not | Only some missing fonts are resolved. | Certain fonts are not licensed, unavailable, or do not exactly match the document's font metadata. | Review the missing-font list, search for alternatives, or contact your font administrator. |
Plugin toggle cannot be enabled | The toggle immediately switches back off or remains unavailable. | Permissions issue, installation conflict, or corporate policy restriction. | Restart Connect+, close all creative apps, and contact your IT administrator if the issue persists. |
Install all plugins does not install every plugin | Some supported applications do not receive plugins. | Unsupported application version or application was installed after enabling the setting. | Restart Connect+, verify compatibility, and enable the plugin manually for the application if available. |
Auto-open Photoshop plugin not working | The Monotype panel does not open when Adobe Photoshop starts. | Auto-open setting is disabled or the Photoshop plugin is not installed. | Enable Auto open plugin on launch of Adobe Photoshop and verify the Photoshop plugin is enabled. |
Fonts remain active after closing a document | Activated fonts stay available on the system. | Temporary font deactivation is configured to occur later or cleanup has not completed yet. | Review the Temporary font deactivation setting and allow time for font cleanup after closing the application. |
Plugin disappeared after a creative app update | The plugin was previously available but no longer appears. | The creative app update removed or disabled the plugin. | Reinstall the plugin from Preferences > Plugins and restart the creative application. |
Plugin performance is slow | Font scanning or activation takes longer than expected. | Large document size, slow network connection, or temporary service delays. | Verify internet connectivity, keep Connect+ updated, and reopen the document. |
Contact support
If you continue to experience issues, provide the following information to Support:
Required information | Example |
Monotype Connect+ App version | 1.x.x |
Creative app | Adobe Photoshop 2026 |
Operating system | Windows 11 or macOS |
Error message | Screenshot or exact text |
Steps to reproduce | Detailed workflow |
Plugin status | Enabled/Disabled in Preferences > Plugins |
This information helps Support diagnose plugin installation, detection, and font activation issues more quickly.








